Biogas upgrading plants   [Download this application case as PDF file]

Bacterial growth on surfaces in contact with water and other liquids (a phenomenon usually known as "biofilm") represents a major problem in most industrial applications. Indeed, this microbiological layer causes a number of issues, including corrosion, equipment failure, decreased performance and many more.

Biogas upgrading is the process that removes impurities (H2S, siloxanes, trace compounds, etc.) and CO2 from biogas, to obtain biomethane. Based on the significantly higher solubility of CO2 in water compared to methane, particularly at lower temperatures, water scrubbing may be used for CH4-CO2 separation of biogas. The CO2-rich water leaving the absorber is regenerated by flashing followed by recycling.

In this biogas upgrading plant (see figure below), no biocide treatment was applied to the water flowing through absorber and desorber, and some problems were observed in the packed beds. The technical staff of the plant supposed that these problems were caused by microorganisms, so an ALVIM Biofilm Sensor was installed in the desorber.

Scheme of absorber / desorber water loop of the biogas upgrading plant

After about a month, the ALVIM Signal showed a gradual increase, indicating biofilm growth (see figure below). The technical staff of the plant decided to apply a strong cleaning and biocide treatment. As it can be seen from the graph, the treatment completely removed biofilm - indeed, ALVIM Signal dropped down to the initial level.

ALVIM Signal indicating biofilm growth and, thanks to biocide treatment, the complete removal of this microbiological layer

Then, to limit a possible re-growth, a "routine" biocide treatment was applied, on a weekly basis. As it can be seen in the figure below, the treatment strongly limited microbiological proliferation.

ALVIM Signal confirming the effectiveness of routine biocide treatment

Thanks to ALVIM Biofilm Monitoring Technology, it was thus possible both to detect the early upset of biofilm, and to check the effectiveness of chemical treatments, greatly improving the overall efficiency of the process.



Do you have a similar problem with biofilm?
Contact our experts and ask for a free custom-tailored consultancy


We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.